Saltar al contenido

Americana Gecko

American Culture. American-Made Goods™.

FTC sues Elk River over “Made in the USA” labels on safety harnesses

The FTC says Elk River did final assembly in Alabama and used imported D-rings, carabiners and snap hooks.

On a label inside an Elk River safety harness, “Proudly made in the USA” appears below “Cullman, AL.” The Federal Trade Commission (FTC) sued Elk River on November 17, 2026, alleging that the label represented the harnesses as “all or virtually all” made in the United States. The FTC says Elk River used imported D-rings. Those metal loops connect workers’ safety lines to their harnesses. FTC complaint · Harness label · FTC allegations about imported parts

An Elk River interior label shows “Cullman, AL” above “Proudly made in the USA.”
The FTC says Elk River used this wording on interior harness labels from at least August 2021 through at least July 2025. Exhibit K

Elk River says it makes fall-protection equipment at its plant in Cullman, Alabama. The FTC says the company did the final assembly in Alabama. The complaint alleges substantial imported content, including carabiners and snap hooks as well as D-rings, and says foreign parts and materials made up a significant share of manufacturing costs. Elk River’s plant · Complaint on final assembly · Complaint on imported hardware and costs

The FTC says Elk River’s website and trade-show flyers used the words “Made in the USA.” Its online harness catalog used “MADE IN USA.” According to the complaint, Elk River stopped making those claims after the FTC opened its investigation. Website claim · Catalog and flyer claims · FTC account of when the claims stopped

An American flag patch on dark harness webbing reads “MADE IN THE USA.”
An exterior patch from Elk River’s premium harness series 666-971 reads “MADE IN THE USA.” The FTC says Elk River used exterior labels marked “Made in U.S.A.” or “Made in the USA” from at least August 2021 through at least May 2026. Exhibit L, pages 7–8

What the words on the label mean

Made in USA

A standalone “Made in USA” label applies to the whole product. Final assembly or processing must happen in the United States. So must every significant manufacturing step. “All or virtually all” parts and materials must be made and sourced here. Federal labeling rule · FTC explanation of the rule

Made in USA with imported materials

This label says the product was made in the United States using imported materials. The FTC advises using it only when the product has a significant amount of U.S. content or significant manufacturing work took place here. The last major change that turned the parts or materials into a new product must happen in the United States. Final assembly, processing or finishing must also happen here. The company needs evidence to back up the label. FTC staff guidance · FTC policy on qualified labels

Assembled in USA

The parts can come from abroad. The main assembly must take place in the United States and involve substantial work. The last major change that turned the parts into a new product must also happen here. Tightening a few screws on a nearly finished product generally falls short. FTC assembly guidance

Designed in USA

A company can design a product in the United States and make it abroad. The FTC gives the example of a label that says “Designed in USA” and “Made in Finland.” An American flag can give shoppers the impression that the product was made in the United States. The FTC considers what the label, package or ad as a whole tells shoppers about where the product was made. FTC guidance on design and packaging

An imported part can count even if it’s small or inexpensive. The FTC looks at what the part does and how directly it goes into the finished product. The agency may give less weight to an imported material used several steps earlier in manufacturing. The FTC also weighs the share of manufacturing costs that comes from U.S. parts and work. There’s no fixed percentage of U.S. content that qualifies a product for “Made in USA.” FTC guidance on costs and imported parts

When a company makes its own parts in a U.S. factory, that work counts toward the product’s U.S. content. The company still needs to check where its materials came from. For parts it buys, the FTC advises asking the supplier where the parts and materials came from and how much of each part is U.S.-made. Even a supplier with a U.S. address can sell imported parts. FTC guidance on suppliers

What the proposed settlement would do

If the judge enters the proposed order, Elk River would have seven days to pay the FTC $72,527.50 toward a $4,367,640.74 judgment. The FTC says Elk River cannot afford the full amount, so the proposal would suspend the balance after payment. At the FTC’s request, the court would make the unpaid balance due with interest if it found that Elk River misstated or left out important financial information. Elk River agreed to the proposed order and neither admits nor denies the allegations about its labels. As of November 21, 2026, the FTC’s case page still showed “Pending.” Proposed order, findings and payment terms · Payment terms, pages 5–6 · FTC explanation · Case status

The order would require Elk River to have evidence ready when it makes a claim about where a product was made. If Elk River calls a product American-made and discloses that it contains imported parts or that some work took place abroad, it would have to disclose the extent of the imported parts or foreign manufacturing in clear, accurate wording right beside the American-made claim. Proposed labeling terms

Elk River would have to email customers it can identify who bought a safety harness from August 1, 2021, through June 10, 2026. The company would have 30 days after the judge enters the order to email the buyers it identified by that date. If Elk River identifies another buyer within a year of the order, it would have 30 days from the day it finds that buyer to send the email. The email would tell buyers the FTC called the “Made in USA” labels and ads misleading and that the harnesses contained imported parts, including the D-rings. Notice requirements · Proposed email

If you suspect a seller has mislabeled a product as American-made, save a photo of the tag or a screenshot of the listing so you have the exact wording when you report it. FTC advice for shoppers · Report a misleading label

La Americana Gecko Toma

When “Assembled in USA with imported parts” accurately describes a product, put it on the tag and the product page. That credits the people who assembled it here and lets customers know about the imported parts before they buy.

A buyer shopping for an American-made harness could trust Elk River’s “Proudly made in the USA” tag and order the harness. The FTC says Elk River used imported D-rings. A competing manufacturer whose harness meets the FTC’s “Made in USA” standard could lose that sale.

We want the FTC to act when companies mislead buyers about where products are made. Even if a company believed its “Made in USA” label was accurate, it owes buyers a correction if the label was wrong. Correct the words wherever they appeared, including tags, product listings and ads. Then tell past buyers where the product was assembled and which parts or materials came from abroad.

Americana Gecko